How To Pair Skullcandy Crusher Evo

The Skullcandy Crusher Evo headphones are known for delivering a powerful audio experience. To enjoy this immersive sound, you’ll need to pair them with your devices. In this guide, we’ll walk you through the process of pairing your Skullcandy Crusher Evo with various devices, including Windows, Android, MacOS, and iPhone. Additionally, we’ll cover key takeaways, troubleshooting common issues, and address frequently asked questions.

Pairing Skullcandy Crusher Evo with Windows Devices

1. Power On Your Headphones:
   • Press and hold the power button on your Crusher Evo headphones until you hear a voice prompt indicating they’re powered on.
2. Access Bluetooth Settings on Your Windows Device:
   • Go to the Start Menu, select Settings, then click on Devices and choose Bluetooth. Turn on Bluetooth.
3. Pair Your Headphones:
   • In the Bluetooth settings, under Other Devices, select your Skullcandy headphones and click Pair.
4. Confirmation:
   • Upon successful pairing, you’ll receive a notification on both your device and the headphones.

Pairing Skullcandy Crusher Evo with Android Devices

1. Activate Pairing Mode on Your Headphones:
   • Press and hold the Power button on the Crusher Evo headphones to enter pairing mode.
2. Access Bluetooth Settings on Your Android Device:
   • Navigate to Settings and select Bluetooth or Other Connections.
3. Pair Your Headphones:
   • Under Available Devices, select your Skullcandy headphones.
4. Verification:
   • Once connected, your headphones will appear under Paired Devices.

Pairing Skullcandy Crusher Evo with MacOS

1. Ensure Headphones are in Pairing Mode:
   • Power on your Crusher wireless headphones and put them in pairing mode.
2. Access Bluetooth Settings on Your MacBook:
   • Click on the Apple logo, go to System Preferences, and select Bluetooth.
3. Connect to Your Headphones:
   • Your Skullcandy headphones should be listed in the Devices section. Double-click or use a two-finger click and select Connect.
4. Confirmation:
   • You’ll receive a notification when the pairing is successful.

Pairing Skullcandy Crusher Evo with iPhone

1. Activate Pairing Mode on Your Headphones:
   • Press the Power button on the Crusher wireless headphones to put them in pairing mode.
2. Open Bluetooth Settings on Your iPhone:
   • Navigate to Settings and select Bluetooth.
3. Connect to Your Headphones:
   • Select your Skullcandy headphones from the list of available devices.
4. Verification:
   • Play an audio file to ensure the connection is established.

Key Takeaways

• Ensure headphones are in pairing mode before attempting to connect.
• Always check that Bluetooth is enabled on your device.
• Follow specific device instructions for accessing Bluetooth settings.

Troubleshooting Issues

• Issue: Headphones not appearing in available devices.
  • Solution: Restart headphones and device, then retry pairing.
• Issue: Weak or no audio signal.
  • Solution: Ensure headphones are charged and within effective range.
• Issue: Disconnection during playback.
  • Solution: Check for interference and obstacles, and re-pair if necessary.

Frequently Asked Questions

Q1: Can I use the Crusher Evo in wired mode?

• A: Yes, you can connect the Crusher Evo with a device using an audio cable.

Q2: How do I reset my Crusher Evo headphones?

• A: Power off the headphones, then press and hold the Volume Up and Volume Down buttons simultaneously for 10 seconds.

Q3: What is the range of Bluetooth connectivity for the Crusher Evo?

• A: The effective range is typically around 30 feet (10 meters) without obstruction.

Following these steps and tips will ensure a seamless connection between your Skullcandy Crusher Evo headphones and your preferred devices. If you encounter any issues, refer to the troubleshooting section or consult the Skullcandy support resources for further assistance. 

You Might Also Like These:

Which Version of Skullcandy Crusher is Best for You?